For Sale
Enco Bench Lathe with 11" swing and 24" between centers
Purchased in 1984 the lathe has been used very little and is in almost new condition.
The lathe features a quick change gear mechanism controlled by two
levers.
Threads per inch can be selected from 4/inch to 112/inch.
The there-jaw chuck and the four-position tool holder are included,
And also included is the heavy duty lathe-stand.
Here is the name plate. Additional information about the lathe follows:
| Description: | |
|---|---|
| Enco Bench Lathe: | 11" Swing, 24" between centers, |
| Hole through Spindle: | 1-3/8" |
| Spindle Speeds: | 70 - 1100 RPM in 12 steps |
| Spindle Taper: | MT 4-1/2 |
| Tail Stock Taper: | MT 2 |
| Model Number: | 92010 |
| Purchased: | June 1984 |
| Condition: | Almost new. Used very little. Some very slight rust |
| New Cost: | $2000 (in 1984) |
| Includes: | Enco 4-bit Tool bit holder, 115V/230V 1-HP motor, Three OD Jaw Chuck, 6-1/2" OD, Heavy home-built stand |