Eagle Image

THE NAFZIGER COLLECTION:

Designed for the wargamer, this collection is an extensive collection of military history and orders of battle.


Home Page What's New Orders of Battle Ordering Information
Price Listing Book Listing Links Wargaming Terrain by the Nafziger Collection Conventions
Click a Button to choose!


FLEXIBLE TERRAIN SYSTEMS

The Nafziger Collection, Inc.

PO Box 1522

West Chester, OH 45071-1522

Tel: 513-777-8734

e-mail: nafziger@fuse.net



—— PRICE LIST ——

PAVED ROADS

PRICE

2 inch Wide road segments
PAV-1 - sharp 90° turn $0.25
PAV-2 - 90° turn $1.00
PAV-3 - 45° turn $1.00
PAV-4 - 45° turn $1.50
PAV-5 - 12" straight $3.00
PAV-11 - Fork – 6" by 3.5" $3.00
1 inch Wide road segments
PAV-6 - sharp 90° turn $0.10
PAV-7 - 90° turn $0.25
PAV-8 - 45° turn $0.25
PAV-9 - 45° turn $0.50
PAV-10 -12" straight $1.50

catalog01.bmp


DIRT ROADS

PRICE

2 inch Wide road segments
DRT-1 - sharp 90° turn $0.25
DRT-2 - 90° turn $1.00
DRT-3 - 45° turn $1.00
DRT-4 - 45° turn $1.50
DRT-5 - 12" straight $3.00
DRT-6 - 20" straight $5.00
DRT-12 - Fork - 6" by 3.5" $3.00
1” Wide road segments
DRT-7 - sharp 90 degree turn $0.10
DRT-8 - 90 degree turn $0.25
DRT-9 - 45 degree turn $0.25
DRT-10 - 45 degree turn $0.35
DRT-11 - 45 degree turn $0.50
DRT-13 - 12" straight $1.50
DRT-14 - 20" straight $2.50

catalog012.bmp


The flexible terrain system consists of felt strips with finishes that simulate a dirt or asphalt road, or water, or other natural features. These strips will lay flush to whatever surface they are laid over, including contours as sharp as 70°. They will not adopt a washboard or other deeply grooved contour. Store components flat. It is not recommended that they be folded 180° as they may develop a permanent crease and the surfacing may be damaged. The roads, rivers, ponds, etc., can be modified simply by cutting them with a pair of common scissors.

Where piece is designed for a specific figure size it will be labeled 6mm, 15mm or 25mm. 6mm pieces are suitable for micro-armor as well. A dimension in inches describes the length or height of the component.

1½-2 inch WIDE RIVERS

PRICE

RIV-1 - 12" straight $6.00
RIV-2 - 20" straight [1] $12.00
RIV-3 - 90 degree turn $1.50
RIV-4 - 90 degree turn $4.50
RIV-5 - 90 degree turn $7.75
RIV-6 - Fork or branch (6”x 4”) $3.00
RIV-7 - 6" Transition 2" to 1" $3.00
RIV-14 - Branch 1” (6" by 4") $6.00

1 inch WIDE RIVERS

PRICE

RIV-8 - 12" straight $4.50
RIV-9 - 20" straight $9.00
RIV-10 - 90 degree turn (like RIV-3) $1.00
RIV-11 - 90 degree turn (like RIV-4) $2.25
RIV-12 - 90 degree turn (like RIV-5) $5.50
RIV-13 - Fork or branch (6" by 4") $3.00

catalog_RIV.bmp


½" STREAMS

PRICE

RIV-14 - 12" straight $6.00
RIV-15 - 90 degree turn (like RIV-3) $1.00
RIV-16 - 90 degree turn (like RIV-4) $2.00
RIV-17 - Fork or branch $1.00
RIV-18 - 12" straight taper to source $6.00
RIV-19 - 1½" stream with ½" branch
             (4"x12")
$6.00

FIELDS, HEDGES, & TREES

PRICE

PF-1 - Plowed Field 12” x 8” $10.00
PF-3 - Plowed Field 6” x 6” $4.00
PF-4 - Plowed Field 4" x 4" $2.00
PF-2 - Muddy Field 12” x 8” $10.00
PF-5 - Ripe Wheat Field 12” x 10” $4.00
PF-6 - Ripe Wheat Field 6” x 10” $2.00
PF-7 - Plowed Field with row crops 6" x 8" $10.00
PF-8 - Harvested Wheat 6"x 8" $10.00
PF-9 - Wild Field (12"x16") $15.00
HDG-1 - Hedge Section 3” $3.00
HDG-2 - Hedge Section 6” $6.00
HDG-3 - 6mm Hedge/Tree Line 4" long x ¼'-½" high $1.50
HDG-5 - 15mm Hedge 4" long x 1" high $1.50
TR-1 Tree (3"+ tall on 2"x2" base) $2.50

OTHER WATER

 

PRICE

DTH-1 - Ditch 6” x 2” $1.00
DTH-2 - Ditch 12” x 2” $2.00
PND-1 - Small pond $3.00
PND-2 - Medium pond $6.00
PND-3 - Large pond $8.00
 

PRICE

LAK-1 - Large lake/ocean edge
               with beach 12”
$6.00
LAK-2 - Lake/ocean with 2”
               river inlet (4” x 4”)
$2.00
LAK-3 - Lake/ocean with 1”
               river inlet (4” x 4”)
$2.00
MSH-1 - Marsh (6"x 8") $6.00

BATTLEFIELD MISCELLANY

 

PRICE

BF-1 - Concertina 4” $2.00
BF-2 - 15mm smoke shell burst
            on green or brown [2]
$0.25
BF-2a - 6mm smoke shell burst
              on green or brown
$0.25
BF-3 - Artillery burst/burning
            tank marker
$0.25
BF-4 - Single Crater $1.50
BF-5 - Double Crater $3.00
BF-6 - Triple Crater $4.50
BF-7 - Dragon’s teeth 12” section $4.00
BF-8 - Dragon’s teeth 20” section $8.00
 

PRICE

CM-1 - 10mm Cemetery (4” x 4”) $5.00
CM-2 - 15mm Cemetery (4” x 4”) $5.00
CM-3 - 25mm cemetery (4” x 4”) $5.00
SW-1 - Stone Wall 3" round stone $2.00
SW-2 - Stone Wall 3" round stone wide base $2.00
SW-3 - Stone Wall 3" flat stone $2.00
FN-1 - Zig-Zag Split Rail Fence (6")(15mm) $2.00
FN-2 - Two Rail Fence (6")(15mm) $1.50
FN-3 - Picket Fence (15mm) (6" long) $3.00

FORTIFICATIONS

 

PRICE

BK-1 - Foxhole - 1"x 1" cavity $4.00
BK-2 - Foxhole - 1"x 2" cavity $5.00
BK-3 - Foxhole - 1"x 3" cavity $6.00
BK-4 - 4.5" Left Angle Trench $6.00
BK-5 - 4.5" Right Angle Trench $6.00
BK-6 - Left Angle Trench End $3.00
BK-7 - Right Angle Trench End $3.00
BK-8 - 1¾" Weapons Pit $9.00
BK-9 - 2" Weapons Pit $11.00
BK-10 - 4" Straight Trench $6.00
BK-11 - 90° Flèche 5½" x 5½" $10.00
BK-12 - 60° Flèche 5½" x 5½" with
             gun slots
$10.00
BK-13 - Breastwork to link Flèches 7" $10.00
BK-14 - Open back breastwork 4½" $5.00
BK-15 - Open back breastwork with
             gun slot 4½"
$5.00
 

PRICE

BK-16 - Breastwork rt end cap $2.00
BK-17 - Breastwork lft end cap $2.00
BK-18 - Breastwork with
             stakes 4½"
$5.00
BK-19 - Breastwork with barbed
             Wire 4½"
$5.00
BK-20 - Reentrant 90° breastwork $6.00
BK-20 - Simple bunker 5½" x 5½"
             (open interior)
$10.00
BK-21 - Palisade 3" (25mm) $3.00
BK-22 - Palisade corner 3" (25mm) $3.00
BK-23 - Palisade 1½" (15mm) $3.00
BK-24 - Palisade corner 1½"
             (15mm)
$3.00
FN-3 - Palisade (6mm) (6" long) $3.00
FN-4 - Palisade tower (6mm) $1.00
FN-5 - Palisade gate with 2 towers
             (6mm)
$5.00

Special, custom made orders accepted.

Foxholes, Trenches & Bunkers

   These are designed to accommodate stands that are 1" by 1". The weapons pit dimension indicates the size of the stand that will fit comfortably into it 1¾"x1¾" or 2"x 2". Dimensions shown are the major dimensions of the bottom of the stand, except the foxholes, where the size of the cavity to accommodate a stand of figures is given. The breastworks and flèche are open backed. The trenches and foxholes are closed front and back. The bunker has a lift-off roof. The left and right angle trenches are designed to join and form a "V" shape to allow the building of zig-zag trenches. A "W' shape can be formed with two left and two right angle trenches. Weapons pits (BK-8 & BK-9) and straight trench pieces (BK-10) can be mixed in to provide variation.

Palisades

   The height of the palisades are indicated in the table. The straight sections are 3" long. The corner pieces are 1½" by 1½".

2” WIDE BRIDGES

PRICE

BG-1 - Approaches (2) $2.00
BG-2 - Pier $0.50
BG-3 - Trestle bridge 4½” long $21.00
BG-4 - Trestle bridge 9” long $28.00

3½” WIDE BRIDGES

PRICE

BG-6 - Approaches (2) $2.00
BG-7 - Pier $0.50
BG-8 - Trestle bridge 4½” long $22.00
BG-9 - Trestle bridge 9” long $30.00

BRIDGES

   The 2" bridges are built such that they will allow the 2" road sections listed above to be laid across them in an uninterrupted manner. The 2" roads are built for 15mm and smaller. The 3½" road is made for 25mm use. In order to put together a complete bridge you will need two approaches (BG-1/6) and a bridge section. Two bridge sections can be linked to form a longer bridge by using a central pier (BG-2/7). The bridge sections come assembled and painted. The trestles are handmade of wood.




Order Worksheet

Name: ___________________________________________


Address: _________________________________________

                _________________________________________


Terrain Piece Unit Cost Number Extended Cost
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
 $  $
TOTAL COST     $



[1] The dimensions advertised are approximates and actual lengths may be longer.  The 2” streams are on a 4” wide piece of felt, with the water being approximately 2” wide with an approximately 1” flocked strip on either side.  Every piece is completely finished and ready for immediate use.  However, the user can add, with a little glue, such things as low shrubs, etc., that are readily purchased at hobby stores.
[2] If ordering smoke, please indicate if you want it on a “desert” brown or “green” base.  Otherwise, all terrain pieces are flocked green.  If you want it in “desert” format, they are only prepared on demand.