P-47 Speed 400

The laser-cut P-47 kit is available for $80, including shipping within the continental US.  You can order by mail or click the PayPal logo for fast, convenient on-line ordering. 

Scale:  1/16
Span: 31"
Length: 26"
Wing Area: 170 SQ IN
Weight RTF: 18 OZ

The P-47 Speed 400 was featured as a construction project in the July, 2001 issue of Model Aviation magazine, and for all you scratch-builders, plans are still available through theAMA Plans Service.   It's designed for a 6V Speed 400 motor on 7 or 8 cells, but it can also be powered by a small brushless motor like theAstroFlight 020 for even more impressive performance.

This is a complete laser-cut kit, and high quality Sig balsa and plywood are used throughout.  The model is of all built-up construction, and the semi-monocoque fuselage is built over a disposable internal crutch to help insure a straight assembly.   Parts are included for both the Razorback and Bubbletop versions, so you can complete your Jug as either variant with absolutely no modifications required.

The prototype shown here is modeled after famed 56th Fighter Group CO Col. "Hub" Zemke's UN-Z, a P-47D-15RE which was his personal aircraft from January to March of 1944.  The airframe was covered with .56 ounce glass cloth and finishing epoxy and painted with Testors Model Master paints. All markings were painted with an airbrush using artist's frisket masks.

The powerplant is a stock 6V Speed 400 motor on 8 X HE1000 NiMH cells. On the prototype, I added rudder control, but the model flies just fine on 3-channel (throttle, aileron and elevator) control.

My latest Jug is a P-47D-25RE Bubbletop from the 325th Fighter Group, known as "The Checkertail Clan".  This model too is glassed and painted with Model Master paints.  The distinctive tail markings were painted before final assembly, using masks cut from frisket film. 


Click for additional P-47 pictures

I recommend the following flight hardware: 6V Speed 400 motor, Graupner #1328 prop adapter, Graupner 6 X 4 prop, 8-cell KAN-1050 NiMH battery pack, 20 amp BEC speed controller and micro radio gear.

 The kit includes all materials needed for construction:

Kits can be ordered by check or money order direct fromRyan Aircraft.
 

Ryan Aircraft

6941 Rob Vern Drive
Cincinnati, OH  45239
Ph:  (513) 729-3323
Fax:  (513) 729-3432

 These nice in-flight shots were taken by my friend Ron Daniels at the 2000 Donnelsville Electric Non-Event. You can visit Ron's site here.

Return to Ryan Aircraft Page

Send E-mail to Jim Ryan